You Have My Whole Heart Sign Finished
I finally finished my sign! Whew, glad that is done. I like the way it turned out, but it was such a challenge for me to figure out how to do the lettering. It took a couple of different tries before I found a system that worked.
I bought 3 pieces of wood fencing that were 6 feet long and had the wonderful guys at Home Depot cut them in half for me {I love this service}.
I found these 5″ stencils at Home Depot while browsing for the wood. As it turned out, they were the same letters my inspiration picture used!
I then bought pine 1 x 2′s and had them cut to size for the back to make a frame. {I kinda guessed the sizes of the lengths while I was in the store, and in the end I had to trim an inch or two off in order for them to fit} But this is how I put the frame together.
I pre-drilled wholes on the 1 x 2′s on each board and across the top and bottom { tip, this helps from the pine from splitting when you screw in your screws}. Then I screwed in 1 1/4″ screws to secure the boards to the frame. At this time I also screwed in heavy duty picture frame hooks and wire. {sorry I forgot to take a picture of the screws and wire on the frame}
You have my heart
I saw this picture on The Painted Hive and feel in love with the sign above the bed. I searched the Internet, and found a site that makes it, and it was $300! Ouch. So off to Home Depot I went to get the supplies to make my own, taking full advantage of their free wood cutting service. I laid out all my pieces and realized I had an extra piece of wood left over. Hmmm…maybe I should do a tester board before I jump into this big project. Plus I needed an excuse to try out my new Circut Expression
Now I am not one to shy away from something I completely have no idea how to do. Which would be this sign. I just went by the seat of my pants, and went for it. I first printed out the saying in a 2″ real size on my new machine {which I am totally loving!} on white scrapbook paper. Painted my board with the “oops” $1 paint I picked up on my Home Depot trip. Then I laid the letters on my board to position them.
